 User Guide |
Introduction NEE Controls Ltd now offer a range of AMC Manual Handpads which can be used with our range of machine controllers, each one designed to provide the operator with the level of remote control needed for his particular application. The downloadable HMI Specification document details handpad features. The Pendant has been developed to provide a significant level of functionality, remotely from the controller. This functionality includes:-
In addition to the buttons there are a number of LEDs that show the current mode of operation as well as the actual status of outputs 1 & 2. The handpad takes its power supply from the controller with a power LED indicating whether the device is active. It is connected through a shielded cable to a 'handpad' port on the AMC. This handpad utilises Input channels 3 and 4 of the AMC.Handpad accessories The Pendant is encased in a standard toughened plastic enclosure. For a small additional cost we can supply a hook set with optional magnet to allow ease of locating and storing the handpad. The magnet is very strong and easily supports the weight of the unit and attached cabling. The hook is of strong plastic design for hanging from a cross bar or loop of up to 18mm in diameter. The magnet/hook combination is securely attached with three screws to the back of the handpad and hinges neatly away into the unit maintaining the ease of handling and good tactile feel of the handpad. Dimensions The Pendant Handpad is supplied in a plastic IP65 rated enclosure of the following dimensions:- Length - 275 mmWidth - 130 mm Depth - 80 mm |
|
